Fireflies Z1 Artemis w/ Reflowed SFT-70 4000K 95CRI

Compact, floody EDC thrower with a reflowed Luminus SFT-70 4000K 95 CRI emitter, excellent thermal regulation, and a flat sustained output after step-down.

Fireflies executed the Z1 design perfectly. The size is ideal for EDC, nearly identical to the Zebralight SC65c. It produces a fantastic flooder beam profile with a large hotspot and useful spill. It is highly practical for typical EDC tasks, close-range illumination, and occasional indoor use.

📏 Physical Specifications

Dimensions
92mm x 26mm x 22mm
Weight
~45g (without battery), 94g (with battery)
Waterproof Rating
IPX8
Impact Resistance
1.5 meters

🛠️ Test Equipment

Lumens & Lux
Tklamp TK2303D Flashlight Tester (Lux measured at 5m)
CCT / Tint / DUV / Ra
Hopoocolor HPCS330P
Thermal Logging
Voltcraft K204 Temperature Data Logger
Current (Amps)
UNI-T UT210D

📷 Camera Settings

🕹️ User Interface

Recessed side switch - an improvement over previous Fireflies models for guarding against accidental activation. Reviewer swapped in an older-style button with a raised retaining ring for easier by-feel operation without a pocket clip.

🔧 Measurement Setup

Host & Reflector
Fireflies Z1 Artemis (TIR Optic)
Driver
Lume X1 Boost Driver (32W)
Emitter
Reflowed Luminus SFT-70 (4000K, 95 CRI, 6V)

📊 Output, Tint, Throw & Beam Profile

ModeCurrent (A)Output (lm)CCTDUVCRI (Ra)R9R12Intensity (cd)ANSI ThrowUsable ThrowRatio
Lvl 10.5233801K-0.005905014m7m2.2
Lvl 20.251163841K-0.0049247543m21m4.1
Lvl 30.753203893K-0.003194140074m37m4.4
Lvl 41.86703945K-0.0025962950108m54m4.4
Lvl 53.811703993K-0.002497905250144m72m4.5
Turbo8.719004025K-0.0024968100180m90m4.3
TM-30 report shown is for Level 5 (3.8A).

📈 Runtime & Thermal Analysis

Runtime graph
Test Parameters
30 min logging
Ambient Temp.
30°C
Battery
Molicel P30B 4.2V

Turbo & Step-down: Output starts at 1,900 lumens. It undergoes a rapid step-down within the first minute to approximately 1,100 lumens, followed by a gradual decline until the 10-minute mark.

Sustained Output: By 10 minutes, output stabilizes completely, maintaining a perfectly flat 500 lumens for the remainder of the test.

Thermal Performance: Temperature peaks near 64°C during the initial step-down phase before stabilizing around 58°C to 60°C under sustained load.

💭 Final Impressions

Driver Performance
The Lume X1 Boost driver handles the 6V SFT-70 efficiently, providing stable regulation and flat sustained output after the initial thermal step-down.
Beam Profile
The TIR optic creates an excellent floody beam profile. The large floodspot and smooth spill make it highly effective for everyday carry and close-range visibility.
Tint & Color Quality
Tint not covered in detail here - already discussed in a previous post on the SFT-70 4000K 95CRI.
Overall Verdict
The recessed button is a solid design and a real improvement over previous Fireflies models when it comes to guarding against accidental activation. I swapped the stock button for an older-style one with a raised retaining ring - easier to find by feel without a pocket clip, and gives a clean, blacked-out look. The Z1 hits a great balance of size and weight: not too light, not too bulky. The knurling looks and feels great, grippy without being aggressive. Overall, a well-designed light that backs up its looks with solid performance.
Also see the original thread on r/flashlight ↗
Scroll to Top